NMC-WO1UD2-FT-ST-WT

Wall outlet, Unshielded, Cat.5e, 1 port, With FT series module

Order table

P/N Category Number of ports Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-WO1UD2-FT-ST-WT 5e 1 0.00009 0.04 50 pcs. 250x190x210 2.3 200 pcs. 515x400x230 9.8

Description

Surface Mount Box are an integral part of horizontal subsystems of SCS and are intended for connection of terminal equipment in workplaces. Structurally, the sockets can be made in two versions: as a complete solution with soldered RJ45 ports and IDC connectors and in the form of a plastic casing into which Keystone plug-in modules are separately installed. These outlets are equipped with NIKOMAX Fast Termination («FT» series) Keystone Jacks and represent a solution completely ready for installation. The «FT» series Keystone modules are designed specifically for use with the NMC-FT-TOOL, which allows you to terminate the module in one push. More information about the tool and «FT» modules you can read in the relevant sections. On the casings of the outlets there are additional break-out windows allowing cables to be brought from either side. For ease of administration on all covers there are marking areas and windows for the installation of colored icons. With plug-in modules, you can always change the configuration of the outlets. Any other Keystone format modules can be installed there in any desired configuration.

Key features

Sockets can be mounted on a wall with a double-sided adhesive base or with two screws

NIKOMAX FT Series Shielded Modules are compatible with the NMC-FT-TOOL tool for fast cable termination

Universal mount, compatible with any NIKOMAX Keystone modules

High-strength, non-flammable, meets UL94V-0

Anti-dust protective shutters

The cover is opened on the side, which makes it easy and convenient to dismantle the outlet

Colored icons for marking

Characteristics

Category

5e

Bandwidth, MHz

100

Connection style

Unshielded

Compliance

Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C

Individual packing

Plastic bag

Warranty

5 years - extended; 25 years - as part of the NIKOMAX SCS certified

Connector type

RJ45/8P8C

Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) Nickel (100 micro-inches)

Number of cable connections

Not less than 750 times

Layout diagram

T568A/B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Installation

Wall

Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

No more than 20

IDC Contact resistance, μΩ

No more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)

Dimensions (WxHxD), mm

40x70x30

Number of ports

1

Installed modules

NMC-KJUD2-FT-MT

Type of IDC contacts (seal)

FT-TOOL fast termination tool or 110 / KRONE Type

Module housing material

High-strength, non-flammable plastic, meets UL94V-0

Socket housing material

Plastic, meets UL94V-0

Color of the case

White

Downloads

Basic equipment

Socket housing 1
Module + Cover 1
Labels for marking 1
Set of colored icons 2
Sticky base 1
Screws 2
Installation Instructions 1