NMC-PC4UD55B-xxx-GY

Patch cord unshielded, category 5e, PVC, 0.3-20 m

Order table

P/N Type Cat. Length, m Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg
NMC-PC4UD55B-003-GY U/UTP 5e 0.3 0.000175 0.030 10 pcs. 0.001750 0.301 360 pcs. 520x420x290 8.68
NMC-PC4UD55B-005-GY U/UTP 5e 0.5 0.000211 0.031 10 pcs. 0.002110 0.310 300 pcs. 520x420x290 10.3
NMC-PC4UD55B-010-GY U/UTP 5e 1.0 0.000254 0.048 10 pcs. 0.002536 0.484 200 pcs. 520x420x290 10.7
NMC-PC4UD55B-015-GY U/UTP 5e 1.5 0.000338 0.067 10 pcs. 0.003376 0.672 150 pcs. 520x420x290 11.1
NMC-PC4UD55B-020-GY U/UTP 5e 2.0 0.000317 0.081 10 pcs. 0.003168 0.805 160 pcs. 520x420x290 13.9
NMC-PC4UD55B-030-GY U/UTP 5e 3.0 0.000422 0.106 10 pcs. 0.004224 1.062 120 pcs. 520x420x290 13.7
NMC-PC4UD55B-050-GY U/UTP 5e 5.0 0.000634 0.183 10 pcs. 0.006336 1.825 80 pcs. 520x420x290 15.6
NMC-PC4UD55B-075-GY U/UTP 5e 7.5 0.001266 0.266 10 pcs. 0.012664 2.655 40 pcs. 520x420x290 11.6
NMC-PC4UD55B-100-GY U/UTP 5e 10.0 0.001448 0.351 10 pcs. 0.014480 3.506 35 pcs. 520x420x290 13.3
NMC-PC4UD55B-150-GY U/UTP 5e 15.0 0.003128 0.510 10 pcs. 0.031281 5.100 25 pcs. 520x420x290 13.1
NMC-PC4UD55B-200-GY U/UTP 5e 20.0 0.003255 0.605 10 pcs. 0.032551 6.050 15 pcs. 520x420x290 14.2
${setHeightTable()}
${ gettext.showAll } (+${ setNumberProducts(+11) - 5 }) ${ gettext.hide }

Description

Patch cords are widely used in any cable system and are designed to connect communication lines with active network equipment, as well as to connect computers at workplaces to switching sockets. They provide high reliability of the connection and allow, if necessary, quickly re-switching.

Patch cords consist of a piece of stranded patch cable terminated with RJ45 / 8P8C type connectors. The cable is routed in patch cords according to the T568B standard. The connector attachment point in NIKOMAX patch cords is protected by a filler cap, which significantly increases the service life of the patch cord. The caps are additionally equipped with snap protection.

Each NIKOMAX patch cord of category 6 and higher is 100% tested on Fluke DTX testers during production. This allows you to guarantee not only their performance, but also full compliance with the most stringent requirements, large reserves of transfer characteristics and reliable operation during the entire service life.Patch cords of category 5e undergo random testing.

Key features

Contacts with gold coating 50 micro-inches. Not less than 750 connection cycles

Special design minimizes crosstalk in connector

Filling caps with lock protection for greater switching convenience

Minimum form factor that does not increase the size of the connector

Choice of jacket material: LSZH or PVC for all patch cords

Characteristics

Category

5e

Bandwidth, MHz

100

Type of conductors

Stranded

Diameter of conductors, AWG

24 (7 x 0.205 ± 0.01 mm)

Insulation material

Polyethylene (PE)

Outer jacket material

Fireproof Polyvinyl Chloride (FR-PVC)

Connection style

Unshielded

Outer jacket diameter, mm

5.5 ± 0.3

Jacket color

Gray

Compliance

Exceeds the requirements of standards: GOST R 54429, ISO / IEC 11801, EN 50173 and TIA / EIA-568

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -20 to +60 ºС. Installation from 0 to +50 ° C. Operation from -20 to +50 ºС

Individual packing

Plastic bag

Warranty

1 year

Layout diagram

T568B on both ends

Connector type

2xRJ45/8P8C

Contact plating

Gold, 50 micro-inches

Protective cap

Gelled, with latch protection

Cable type

U/UTP

Number of pairs

4

Downloads

Basic equipment

Patch cord 1