NMC-PC4UD55B-xxx-CS-RD

Patch cord with lock, unshielded, category 5E, LSZH, 0.5-3 m, red

Order table

P/N Type Cat. Length Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg
NMC-PC4UD55B-005-CS-RD U/UTP 5e 0.5 0.000128 0.030 10 pcs. 0.002533 0.30 250 pcs. 520x420x290 8
NMC-PC4UD55B-010-CS-RD U/UTP 5e 1.0 0.000181 0.050 10 pcs. 0.003376 0.50 150 pcs. 520x420x290 8
NMC-PC4UD55B-015-CS-RD U/UTP 5e 1.5 0.000361 0.070 10 pcs. 0.003376 0.70 150 pcs. 520x420x290 11
NMC-PC4UD55B-020-CS-RD U/UTP 5e 2.0 0.000180 0.080 10 pcs. 0.004224 0.80 120 pcs. 520x420x290 10.1
NMC-PC4UD55B-030-CS-RD U/UTP 5e 3.0 0,000342 0.120 10 pcs. 0.005064 1.20 100 pcs. 520x420x290 12.5
NMC-RJ-LOCK-RD Plug 0,000004 0,010
NMC-RJ-KEY-RD Key 0,000001 0,010
${setHeightTable()}
${ gettext.showAll } (+${ setNumberProducts(+7) - 5 }) ${ gettext.hide }

Description

Patch cords are widely used in any cable system and are intended for connecting communication lines with active network equipment, as well as for connecting computers at workplaces to switching sockets. They provide high reliability of the connection and allow quickly re-commute if necessary.

Patch cords consist of a piece of stranded cable terminated with RJ45 / 8P8C type connectors. The cable is routed in patch cords according to the T568B standard. The connector's fastening point in NIKOMAX patch cords is protected by a filler cap, which significantly increases the service life of the patch cord. The caps are additionally equipped with snap protection.

Feature of patch cords with index <CS> such as NMC-PC4UD55B-xxx-CS-RD – is with the presence of a mechanism that locks the connector latch in the RJ45 socket. Thus, the cord cannot be unplugged without a special key that opens the locking mechanism. These patch cords can be used to protect critical connections from accidental or deliberate disconnection. The patch cords are made with a red casing to clearly identify such important lines.

The connector, together with the blocking mechanism, is also supplied separately as a kind of plug for ports that cannot be connected: NMC-RJ-LOCK-RD. This plug is meant as a cap for locking unused ports. For patch cords with a lock or connector-plugs, you must purchase a separate key NMC-RJ-KEY-RD. The keys have a universal format, which eliminates the need to acquire them in the same amount as the patch cords themselves.

Each NIKOMAX patch cord of category 6 and higher is 100% tested on Fluke DTX testers during production. This allows you to guarantee not only their performance, but also full compliance with the most stringent requirements, large reserves of transmission characteristics and reliable operation during the entire service life. However patch cords of category 5e undergo random testing.

Characteristics

Category

5e

Bandwidth, MHz

100

Type of conductors

Stranded

Diameter of conductors, AWG

24 (7x0.205 ± 0.01 mm)

Insulation material

Polyethylene (PE)

Outer jacket material

LSZH

Connection style

Unshielded

Outer jacket diameter, mm

5.5 ± 0.3

Jacket color

Red

Compliance

Exceeds the requirements of standards: GOST R 54429, ISO / IEC 11801, EN 50173 and TIA / EIA-568

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -20 to +60 ºС. Installation from 0 to +50 ° C. Operation from -20 to +60 ºС

Individual packing

Plastic bag

Warranty

1 year

Connector type

2xRJ45 / 8P8C

Layout diagram

T568B on both ends

Contact plating

Gold, 50 micro-inches

Protective cap

Cap with locking mechanism

Cable type

U / UTP

Number of pairs

4

Downloads