NMC-PC4SI55B-xxx-С-YL

S/FTP Patch cord 4 Pairs, Cat.8 (Class I), LSZH ng(А)-HFLTx, Yellow, 1-5 m

Order table

P/N Cat. Type of connector Connection style Length, m Color Volume, m3 Weight, kg To compare Add to cart
NMC-PC4SI55B-010-C-YL 8 2xRJ45/8P8C Shielded 1 Yellow - -
NMC-PC4SI55B-020-C-YL 8 2xRJ45/8P8C Shielded 2 Yellow - -
NMC-PC4SI55B-030-C-YL 8 2xRJ45/8P8C Shielded 3 Yellow - -
NMC-PC4SI55B-050-C-YL 8 2xRJ45/8P8C Shielded 5 Yellow - -

Description

Patch cords are designed to connect the ports of patch panels and active network equipment to each other, as well as to connect computers at workplaces to switching sockets. Patch cords provide high reliability of the connection, and allow, if necessary, quickly re-switching.

The patch cords of the NMC-PC4SI55B-xxx-C-YL consist of a piece of shielded multicore patch cable terminated with RJ45 / 8P8C connectors, correspond to category 8 (1600-2000 MHz) and are intended for use in communication lines with a 40 Gbit/s data transfer rate. The cable is routed in patch cords according to the T568B standard. The cable attachment point is protected by a filler cap, which significantly increases the service life of the patch cord. The caps are provided with protection of the connectors latches. Patch Cords are made with a yellow jacket, lengths from 1 to 5 meters.

Characteristics

Category

8

Bandwidth, MHz

1600 - 2000

Type of conductors

Stranded

Diameter of conductors, AWG

24 AWG (7х0.195)

Insulation material

Polyethylene foam (PE foam)

Outer jacket material

LSZH

Connection style

Shielded

Outer jacket diameter, mm

7.4

Compliance

Exceeds standards: ISO / IEC 11801, EN 50173 and TIA / EIA-568

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10GBASE-T, 25GBASE-T, 40GBASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Individual packing

Individual - Plastic bag

Connector type

2xRJ45/8P8C

Layout diagram

T568B on both ends

Color

Yellow

Contact plating

Gold, 50 micro-inches

Protective cap

Gelled, with latch protection

Cable type

S/FTP

Screen construction

Internal screen: polyester aluminum foil with 100% coating, individual for each pair. The general screen: a braid of tinned copper wire 16x5x0.1 mm with a coverage area of at least 55%

Number of pairs

4

Warranty

1 year

Temperature range

Storage from -20 to +60ºС. Installation from 0 to +50°C. Operation from -20 to +60ºC.

Outer diameter of conductor insulation, mm

1.4

Downloads