NMC-PC4SD55B-xxx-C-GY

Patch cord, shielded, category 5e, LSZH, 0.3-20 m

Order table

P/N Type Cat. Length, m Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg
NMC-PC4SD55B-003-C-GY F/UTP 5e 0.3 0.000211 0.028 10 pcs. 0.002100 0.281 300 pcs. 520x420x290 9.4
NMC-PC4SD55B-005-C-GY F/UTP 5e 0.5 0.000254 0.043 10 pcs. 0.002536 0.431 200 pcs. 520x420x290 9.6
NMC-PC4SD55B-010-C-GY F/UTP 5e 1.0 0.000338 0.058 10 pcs. 0.003376 0.585 150 pcs. 520x420x290 9.8
NMC-PC4SD55B-015-C-GY F/UTP 5e 1.5 0.000422 0.079 10 pcs. 0.004224 0.788 120 pcs. 520x420x290 10.2
NMC-PC4SD55B-020-C-GY F/UTP 5e 2.0 0.000506 0.102 10 pcs. 0.005064 1.022 100 pcs. 520x420x290 11.2
NMC-PC4SD55B-030-C-GY F/UTP 5e 3.0 0.000634 0.148 10 pcs. 0.006336 1.480 80 pcs. 520x420x290 12.8
NMC-PC4SD55B-050-C-GY F/UTP 5e 5.0 0.001014 0.230 10 pcs. 0.010136 2.296 50 pcs. 520x420x290 12.5
NMC-PC4SD55B-075-C-GY F/UTP 5e 7.5 0.001266 0.344 10 pcs. 0.012664 3.438 40 pcs. 520x420x290 14.8
NMC-PC4SD55B-100-C-GY F/UTP 5e 10.0 0.001448 0.422 10 pcs. 0.014480 4.223 35 pcs. 520x420x290 15.8
NMC-PC4SD55B-150-C-GY F/UTP 5e 15.0 - - 10 pcs. - - - 520x420x290 -
NMC-PC4SD55B-200-C-GY F/UTP 5e 20.0 - - 10 pcs. - - - 520x420x290 -
${setHeightTable()}
${ gettext.showAll } (+${ setNumberProducts(+11) - 5 }) ${ gettext.hide }

Description

Patch cords are used in any cable system and are designed for the connection of communication lines with active network equipments, and also for connecting of computers in the workplace to the network device. They provide high connection reliability and allow to quickly change to any connection needs.

Patch cords are made from stranded cables, terminated with connectors such as RJ45 /8P8C compliant with T568B standard.NIKOMAX patch cord connectors are protected by boot cover, which signi cantly increases service life of a patch cord with latch protection.

Each NIKOMAX Category 6 patch cord and above are checked 100% with Fluke DTX during production. This ensures both performance and full compliance with the most stringent requirements of large reserves of transmission characteristics and reliable performance throughout the life cycle.

Key features

Contacts with gold coating 50 micro-inches. Not less than 750 connection cycles

Special design minimizes crosstalk in the connector

Filling caps with lock protection for greater switching convenience

Minimum form factor that does not increase the size of the connector

Choice of jacket material: LSZH or PVC for all patch cords

Characteristics

Category

5e

Bandwidth, MHz

100

Type of conductors

Stranded

Diameter of conductors, AWG

26 (7 x 0.165 ± 0.01 mm)

Insulation material

Polyethylene (PE)

Outer jacket material

LSZH

Connection style

Shielded

Outer jacket diameter, mm

6 ± 0.3

Jacket color

Gray

Compliance

Exceeds the requirements of the standards:ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -20 to +60 ºС. Installation from 0 to +50 ° C. Operation from -20 to +50 ºС

Individual packing

Plastic bag

Warranty

1 year

Layout diagram

T568B on both ends

Connector type

2xRJ45/8P8C

Contact plating

Gold, 50 micro-inches

Protective cap

Gelled, with latch protection

Cable type

F/UTP

Screen construction

The general screen: polyester aluminum foil, with 100% coating, laid in contact with the drainage conductor

Number of pairs

4

Downloads

Basic equipment

Patch cord 1