NMC-PC4SA55B-xxx-zz

Patch cord, Shielded category 6A, PVC, 0.3-20 m, 7 color options

Order table

P/N Type Cat. Length, m Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg
NMC-PC4SA55B-003-ZZ S/FTP 6A 0.3 0.000211 0.028 10 pcs. 0.002100 0.281 300 pcs. 520x420x290 9.4
NMC-PC4SA55B-005-ZZ S/FTP 6A 0.5 0.000254 0.043 10 pcs. 0.002536 0.431 200 pcs. 520x420x290 9.6
NMC-PC4SA55B-010-ZZ S/FTP 6A 1.0 0.000338 0.058 10 pcs. 0.003376 0.585 150 pcs. 520x420x290 9.8
NMC-PC4SA55B-015-ZZ S/FTP 6A 1.5 0.000422 0.079 10 pcs. 0.004224 0.788 120 pcs. 520x420x290 10.2
NMC-PC4SA55B-020-ZZ S/FTP 6A 2.0 0.000506 0.102 10 pcs. 0.005064 1.022 100 pcs. 520x420x290 11.2
NMC-PC4SA55B-030-ZZ S/FTP 6A 3.0 0.000634 0.148 10 pcs. 0.006336 1.480 80 pcs. 520x420x290 12.8
NMC-PC4SA55B-050-ZZ S/FTP 6A 5.0 0.001014 0.230 10 pcs. 0.010136 2.296 50 pcs. 520x420x290 12.5
NMC-PC4SA55B-075-ZZ S/FTP 6A 7.5 0.001266 0.344 10 pcs. 0.012664 3.438 40 pcs. 520x420x290 14.8
NMC-PC4SA55B-100-ZZ S/FTP 6A 10.0 0.001448 0.422 10 pcs. 0.014480 4.223 35 pcs. 520x420x290 15.8
NMC-PC4SA55B-150-ZZ S/FTP 6A 15.0 - - 10 pcs. - - - 520x420x290 -
NMC-PC4SA55B-200-ZZ S/FTP 6A 20.0 - - 10 pcs. - - - 520x420x290 -
${setHeightTable()}
${ gettext.showAll } (+${ setNumberProducts(+11) - 5 }) ${ gettext.hide }

Description

NIKOMAX patch cords are widely used in any cable system and are designed to connect communication lines with active network equipment, as well as to connect computers at workplaces to switching sockets. They provide high reliability of the connection and allow, if necessary, quickly re-switching.

Patch cords consist of a piece of stranded patch cable terminated with RJ45 / 8P8C type connectors. The cable is routed in patch cords according to the T568B standard. The connector attachment point in NIKOMAX patch cords is protected by a filler cap, which significantly increases the service life of the patch cord. The caps are additionally equipped with snap protection.

Each NIKOMAX patch cord of category 6 and higher is 100% tested on Fluke DTX testers during production. This allows you to guarantee not only their performance, but also full compliance with the most stringent requirements, large reserves of transfer characteristics and reliable operation during the entire service life. Patch cords of category 5e undergo random testing.

Key features

Contacts with gold coating 50 micro-inches. Not less than 750 connection cycles

Special design minimizes crosstalk in connector

Filling caps with lock protection for greater switching convenience

Minimum form factor that does not increase the size of the connector

Choice of jacket material: LSZH or PVC for all patch cords

Characteristics

Category

Bandwidth, MHz

500

Type of conductors

Stranded

Diameter of conductors, AWG

26 (7 x 0.165 ± 0.01 mm)

Insulation material

Polyethylene foam (PE foam)

Outer jacket material

Fireproof Polyvinyl Chloride (FR-PVC)

Connection style

Shielded

Outer jacket diameter, mm

6.2 ± 0.3

Jacket color

7 colors

Compliance

Exceeds the requirements of standards: GOST R 54429, ISO / IEC 11801, EN 50173 and TIA / EIA-568

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10GBASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -20 to +60 ºС. Installation from 0 to +50 ° C. Operation from -20 to +50 ºС

Individual packing

Plastic bag

Warranty

1 year

Layout diagram

T568B on both ends

Connector type

2xRJ45/8P8C

Contact plating

Gold, 50 micro-inches

Protective cap

Gelled, with latch protection

Cable type

S/FTP

Screen construction

Internal screen: 100% coated polyester aluminum foil, individual for each pair. Overall screen: tinned copper wire braid 16x5x0.1 mm with a coating area of at least 55%

Number of pairs

4

Downloads

Basic equipment

Patch cord 1