NMC-RP48SE2-1U-MT

Shielded patch panel, 48 ports, 19", 1U, category 6

Order table

P/N Cat. Number of ports Height, U Individual package Freight package To compare Add to cart
Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-RP48SE2-1U-MT 6 48 1 - - - - -

Description

Shielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX NMC-RP48SE2-1U-MT (Cat.6), high-density panels with unshielded housings are intended for installation in 19’’ cabinets and racks. These panels contain 48 port RJ45 / 8P8C at a height of only 1U. This solution is ideal when it is necessary to provide a high port density (e.g., data centers) or to extend the network in the limited space of the cabinet. Universal IDC contacts for 110 / KRONE type knives are located on the rear side of panels . There are two wiring standards: T568 A and B. A built-in organizer for reliable cable fixing.

Key features

Special contact design minimizes crosstalk

Fully shielded, 1U nickel-plated steel housing

All ports are numbered

Color scheme wiring to two standards: T568A / B

Universal IDC contacts 110 / Krone To improve the convenience of embedding, the contact blades are provided with slots that firmly hold the wires during wiring.

9th IDC pin specifically for grounding drain cable conductor

Common grounding bus and screw terminals for the best electrical connection to the panel body

Characteristics

Category

6

Bandwidth, MHz

250 МHz

Diameter of conductors, AWG

~24-22 AWG (0.50-0.65 mm)

Connection style

Shielded

Compliance

ISO / IEC 11801, EN 50173 and ANSI/TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (55M for Cat. 6),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C

Individual packing

Cardboard box

Warranty

5 years - extended; 25 years - as part of the NIKOMAX SCS certified

Number of ports

48

Height, U

1

Connector type

RJ45/8P8C

Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

110 / KRONE

Layout diagram

T568A/B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, meets UL94V-0

Marking

All ports are numbered, there are additional labeling area

Installation

19’’ Cabinet or rack

Material of the supporting structure

Steel 1.5 mm

Color

Black

Insulation resistance

Not less than 500 M (at constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Depth in rack (with organizer), mm

123

Downloads

Basic equipment

Patch panel 1
Cable organizer 1
Cable tie 48
Screw-washer-nut 4
Installation Instructions 1