NMC-RP24UD2-AN-1U-BK

Unshielded patch panel with angled ports, 24 ports, 19 ", 1U, Category 5e

Order table

P/N Cat. Number of ports Height, U Individual package Freight package To compare Add to cart
Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-RP24UD2-AN-1U-BK 5e 24 1 510x80x60 0.91 15 pcs. 515x375x240 16.4

Description

Unshielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. A feature of the series of panels «AN» are angled ports that allow you to conveniently distribute patch cords in hand, and fix them on the vertical cable organizer. This solution eliminates the need for standard cable shunting rings and save valuable space in the cabinet. • NIKOMAX NMC-RP24UE2-AN-1U-BK (Cat. 6) and NMC-RP24UD2-AN-1U-BK (Cat.5e) for up to 24 ports RJ45 / 8P8C at the height of 1U; • NIKOMAX NMC-RP48UE2-AN-2U-BK (Cat. 6) and NMC-RP48UD2-AN-2U-BK (Cat.5e) for up to 48 ports RJ45 / 8P8C at 2U height and are more cost-effective solution. The panels are made in black and are intended for the 19’’ cabinet or rack mounting. On the rear side of panels are contacts for 110 type knives, and color-coded according to the standard T568A / B. For administrative convenience, all ports are numbered, there are additional labeling area . The patch panels offer convenient detachable organizers for routing incoming cables. For administrative convenience, it is also recommended for every 48-port patch panels additionally put organizer for stacking patch cords.

Key features

Universal IDC contacts 110 / Krone (it is recommended to use 110 type knives) To improve the convenience of terminating, the contact blades are provided with slits that firmly hold the wires in the wiring process

Contacts with 50 micro-inches gold plating: not less than 750 connecting cycles. The design of the tracks minimizes crosstalk in the connector (for Cat.6) RJ45 ports, angled, allow you to output patch cords to the sides and fasten them to vertical cable organizers, saving space in the cabinet

All ports are numbered

IDC contacts are compatible with 110 type knife and the NMC-315DR tool with a nozzle for simultaneous sealing of 4 pairs

Removable cable organizer included

Color scheme of wiring according to two standards: T568 A and B

There are additional areas for marking

Characteristics

Category

5e

Bandwidth, MHz

100

Connection style

Unshielded

Compliance

Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C

Individual packing

Cardboard box

Warranty

5 years - extended; 25 years - as part of the NIKOMAX SCS certified

Number of ports

24

Height, U

1

Connector type

RJ45/8P8C

Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

110/KRONE

Layout diagram

T568A/B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, meets UL94V-0

Marking

All ports are numbered, there are additional labeling area

Installation

19’’ Cabinet or rack

Material of the supporting structure

Steel 1.5 mm

Color

Black

Insulation resistance

Not less than 500 M ohms (at constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)

Depth in rack, without / with organizer, mm

30/80

Downloads

Basic equipment

Patch panel 1
Cable organizer 1
Cable tie 24
Screw-washer-nut 4
Installation Instructions 1