Patch Panel, with Angled Jacks, 1U
Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords.
NIKOMAX NMC-RP24-BLANK-AN-1U-MT has a standard height of 1U and 24 ports for NIKOMAX angled jacks Series AN (Panel is compatible with any standard keystone jacks).
A feature AN series module is with an angled design allows you to conveniently lay patch cords to the side and fasten them to the vertical cable organizer. This solution eliminates the need for standard cable shunting rings, saving valuable space in the cabinet.
The patch panel is made of 1.5 mm steel and is suitable for both shielded and unshielded jacks. For better shielding against electromagnetic interference and improve communication with unpainted rails cabinet, galvanized steel panels coated with nickel.
The patch panels offer removable organizers for routing incoming cables.
Shielded version, nickel-plated steel housing
Removable organizer with a convenient comb for placing cables
All ports are numbered
There are additional areas for marking
The panel is intended for use with "AN" series modules (but compatible with standard Keystone modules)
Grounding wire for grounding to the common rail of the cabinet
The numbering of ports on the back of the panel allows you to quickly navigate during installation and further maintenance
Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C
|Number of ports||
All ports are numbered, there are additional labeling area
19" Cabinet or rack
Nickel-plated steel, 1.5 mm
|Type of installed modules||
Keystone (no wider than 17 mm)
|Depth in rack (with organizer), mm||
|Vendor code||Number of ports||Height, U||Individual package||Freight package|
|Dimensions, mm||Weight, kg||Quantity||Dimensions, mm||Weight, kg|