NMC-CJ06SA2-1S-MT

Cassette module, shielded, category 6A

Description

The cassette modules are designed exclusively for mounting in the cassette panel NIKOMAX NMC-RP08-BLANK-CJ-1U-MT.

The NMC-CJ06SA2-1S-MT (Cat.6A) and NMC-CJ06SE2-1S-MT (Cat.6) cassettes are made in fully shielded steel enclosures and are a kind of reduced versions of shielded patch panels - a capacity of 6 ports RJ45 / 8P8C. Universal IDC contacts 110 / KRONE are located inside the cassettes, on a horizontal substrate. Cabling is made by two standards: T568 A and B.

The cable screens are pairwise grounded to the screw terminals. The 9th grounding IDC contact is provided - specifically for the drain cable conductor. On both sides of the printed circuit board there are common ground buses. For better shielding from electromagnetic interference and better communication with the panel body, the steel cassette cases are galvanized with nickel.

Key features

Contacts with gold coating 50 micro-inches: not less than 750 cycles of connecting cords. The design of the tracks minimizes crosstalk in the connector The spring-loaded clips on the sides of the socket ensure reliable contact with the patch cord screen

Marking area (paper stickers complete with panel)

Color scheme of wiring according to two standards: T568 A and B

Common ground bus and screw terminals for best electrical connection to the panel housing 9th IDC contact especially for grounding drain cable conductor

Fully shielded version, compact housing 0.5U high from nickel-plated steel

Universal IDC contacts 110 / Krone (it is recommended to use knives of type 110) To improve the convenience of sealing, the contact blades are provided with slits that firmly hold the wires in the wiring process

Characteristics

Characteristic Value
Category

6A

Bandwidth, MHz

500

Connection style

Fully shielded

Compliance

Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C

Individual packing

Cardboard box

Warranty

5 years - extended; 25 years - as part of the certified NIKOMAX SCS

Connector type

RJ45/8P8C

Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750 times

Type of IDC contacts (seal)

110/KRONE

Layout diagram

T568A/B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Marking

Absent. Performed on stickers (complete with cassette panel)

Installation

NIKOMAX Cassette panel - CJ series

Color

Metallic (nickel)

Insulation resistance

At least 500 M ohms (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)

Housing material

Nickel-plated steel: housing-1.5 mm; Cover-1 mm

Number of ports

6

Downloads

Key features

Contacts with gold coating 50 micro-inches: not less than 750 cycles of connecting cords. The design of the tracks minimizes crosstalk in the connector The spring-loaded clips on the sides of the socket ensure reliable contact with the patch cord screen

Marking area (paper stickers complete with panel)

Color scheme of wiring according to two standards: T568 A and B

Common ground bus and screw terminals for best electrical connection to the panel housing 9th IDC contact especially for grounding drain cable conductor

Fully shielded version, compact housing 0.5U high from nickel-plated steel

Universal IDC contacts 110 / Krone (it is recommended to use knives of type 110) To improve the convenience of sealing, the contact blades are provided with slits that firmly hold the wires in the wiring process

Order table

Vendor code Cat. Number of ports Individual package Freight package
Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-CJ06SA2-1S-MT 6A 6 125x100x23 0.25 48 pcs. 515x375x240 13.5