NMC-KJUD2-FT-WT

Fast Termination series keystone jack, Unshielded, Category 5e

Description

NIKOMAX Fast Termination jacks («FT» series) are speci cally designed for use with a quick termination tool (NMC-FT-TOOL). All you need is to spread the cable to the module contacts, insert it into the tool and simply squeeze the handles. The accurate and high-quality termination in just a single click! The IDC contacts of FT jack are also compatible with punch down tool with 110/KRONE knife.

The jacks are fully compatible with all NIKOMAX components. Only 17 mm width and a standard height allows you to install them in any snap-in patch panels, including high density models with 0.5U height.

NMC-KJUD2-FT-WT (CAT.5e) are made from durable plastic, making them ideal for the unshielded systems.

Key features

The unique design of the contact part, designed for fast cable termination with the NMC-FT-TOOL tool. The contacts are also compatible with the percussion tool with 110 / Krone knives (110 type knives are recommended) To improve the ease of installation, the contact blades are provided with slots that hold the wires in the wiring process

Additional marking of the category on the back of the module for easy handling of patch panels

Contacts with 50 micro-inches gold plating, At least 750 connection cycles Special design minimizes crosstalk in the connector (for category 6)

Protective cover fixes conductors in IDC contacts

Compact size allows you to install modules in 24-port dial-up patch panels, including 0.5U

Characteristics

Characteristic Value
Category

Bandwidth, MHz

100

Connection style

Unshielded

Compliance

Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6 & 6А),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C

Warranty

5 years - extended; 25 years - as part of the certified NIKOMAX SCS

Connector type

RJ45/8P8C

Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

FT-TOOL fast-termination tool or 110 / KRONE knives

Layout diagram

T568A/B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Installation

Patch panels, surface mount box, faceplate

Color

White

Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 мм)

Format

Keystone

Housing material

High-strength non-flammable plastic, meets UL94V-0

Dimensions (WxHxD), mm

17х19х32

Packaging

Individual - Plastic bag

Downloads

Key features

The unique design of the contact part, designed for fast cable termination with the NMC-FT-TOOL tool. The contacts are also compatible with the percussion tool with 110 / Krone knives (110 type knives are recommended) To improve the ease of installation, the contact blades are provided with slots that hold the wires in the wiring process

Additional marking of the category on the back of the module for easy handling of patch panels

Contacts with 50 micro-inches gold plating, At least 750 connection cycles Special design minimizes crosstalk in the connector (for category 6)

Protective cover fixes conductors in IDC contacts

Compact size allows you to install modules in 24-port dial-up patch panels, including 0.5U

Order table

Vendor code Cat. Type. Individual package Collective package Freight package
Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-KJUD2-FT-WT 5e Unshielded. 0.000068 0.010 150 pcs. 250x190x210 1.7 600 pcs. 515x400x230 7.4