NMC-KJSE2-NT-MT

Tool-less, Shielded, Category 6

Order table

P/N Cat. Type. Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-KJSE2-NT-MT 6 Shielded. 0.000087 0.035 120 pcs. 250x190x210 4.4 480 pcs. 515x400x230 18.4

Description

NIKOMAX Toolless jacks («NT» series), do not require a special tool for termination. The inner insert provides convenient and high quality termination with anhanced crosstalk characteristics. The jacks are fully compatible with all NIKOMAX components. Only 17 mm width and a standard height allows you to install them in any snap-in patch panels, including high density models with 0.5U height. NMC-KJSA2-NT-MT (Cat.6A), NMC-KJSE2-NT-MT (Cat.6) and NMC-KJSD2-NT- MT (CAT.5e) are made in fully shielded, zinc-aluminum alloy housing. After install, a shielded cable will be safely clamped between the hinged lid and the module’s built- in spring-loaded clip body. This design provides a constant and close contact with the screen, do not worsen over time.

Key features

Spring-loaded clamps for reliable contact with the patch cord screen

Fully shielded version, die-cast zinc-aluminum alloy housing

The design of the contact part excludes the possibility of contact of the conductor cores with the module housing

The built-in spring-loaded clip securely secures the cable and ensures a tight contact of its screen with the module housing

Contacts with 50 micro-inches gold plating. Not less than 750 connection cycles Special design minimizes crosstalk in the connector

Strong latches securely fix the hinged cover of the module and, if necessary, easily open

The insert ensures even insertion of the cable cores into the IDC contacts of the contacts. The cross in the insert carries the pairs in space, reducing the cross-talk within the module

Compact size allows you to install modules in 24-port dial-up patch panels, including 0.5U

Characteristics

Category

6

Bandwidth, MHz

250

Connection style

Fully shielded

Compliance

Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6 & 6А), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C

Warranty

5 years - extended; 25 years - as part of the certified NIKOMAX SCS

Connector type

RJ45/8P8C

Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

FT-TOOL fast-termination tool or 110 / KRON knives

Layout diagram

T568A/B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, meets UL94V-0

Installation

Patch panels, surface mount box, faceplate

Color

Metallic (nickel)

Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 мм)

Format

Keystone

Housing material

Zinc-aluminum alloy

Dimensions (WxHxD), mm

17х19х40

Packaging

Individual - Plastic bag

Downloads

Basic equipment

Module 1
Inset 1
Installation instructions 1